ADOLESCENTE É APREENDIDO POR RECEPTAÇÃO DE MOTO FURTADA EM NOVA SERRANA

I cannot thank you enough for the blog.Really thank you! Cool.

Im thankful for the article post. Awesome.

Thank you for your blog post.Thanks Again. Keep writing.

Balanset-1A: Innovative Portable Balancer & Vibration Analyzer
Professional Dynamic Balancing Solution
Balanset-1A constitutes an revolutionary solution for vibration correction of rotors in their own bearings, engineered by Estonian company Vibromera OU. The device provides professional equipment balancing at €1,751, which is substantially less expensive than traditional vibration analyzers while preserving superior measurement accuracy. The system permits in-place balancing directly at the equipment’s installation site without requiring disassembly, which is vital for minimizing production downtime.
About the Manufacturer
Vibromera OU is an Estonian company focusing in the development and manufacturing of devices for technical diagnostics of industrial equipment. The company is incorporated in Estonia (registration number 14317077) and has representatives in Portugal.
Contact Information:

Official website: https://vibromera.eu/shop/2/

Technical Specifications
Measurement Parameters
Balanset-1A provides accurate measurements using a two-channel vibration analysis system. The device measures RMS vibration velocity in the range of 0-80 mm/s with an accuracy of ±(0.1 + 0.1?Vi) mm/s. The functional frequency range is 5-550 Hz with optional extension to 1000 Hz. The system supports rotational speed measurement from 250 to 90,000 RPM with phase angle determination accuracy of ±1 degree.
Operating Principle
The device uses phase-sensitive vibration measurement technology with MEMS accelerometers ADXL335 and laser tachometry. Two mono-directional accelerometers measure mechanical oscillations proportional to acceleration, while a laser tachometer generates impulse signals for determining RPM and phase angle. Digital signal processing includes FFT analysis for frequency analysis and custom algorithms for automatic calculation of correction masses.
Full Kit Components
The standard Balanset-1A delivery includes:

Measurement unit with USB interface – primary module with built-in preamplifiers, integrators, and ADC
2 vibration sensors (accelerometers) with 4m cables (optionally 10m)
Optical sensor (laser tachometer) with 50-500mm measuring distance
Magnetic stand for sensor mounting
Electronic scales for exact measurement of corrective masses
Software for Windows 7-11 (32/64-bit)
Plastic transport case
Complete set of cables and documentation

Functional Capabilities
Vibrometer Mode
Balanset-1A works as a full-featured vibration analyzer with capabilities for measuring overall vibration level, FFT spectrum analysis up to 1000 Hz, determining amplitude and phase of the fundamental frequency (1x), and continuous data recording. The system delivers visualization of time signals and spectral analysis for equipment condition diagnostics.
Balancing Mode
The device supports one-plane (static) and two-plane (dynamic) balancing with automatic calculation of correction masses and their installation angles. The unique influence coefficient saving function permits considerable acceleration of repeat balancing of similar equipment. A specialized grinding wheel balancing mode uses the three-correction-weight method.
Software
The user-friendly program interface delivers step-by-step guidance through the balancing process, making the device usable to personnel without special training. Key functions include:

Automatic tolerance calculation per ISO 1940
Polar diagrams for imbalance visualization
Result archiving with report generation capability
Metric and imperial system support
Multilingual interface (English, German, French, Polish, Russian)

Fields of Use and Equipment Types
Industrial Equipment
Balanset-1A is effectively used for balancing fans (centrifugal, axial), pumps (hydraulic, centrifugal), turbines (steam, gas), centrifuges, compressors, and electric motors. In manufacturing facilities, the device is used for balancing grinding wheels, machine spindles, and drive shafts.
Agricultural Machinery
The device offers particular value for agriculture, where continuous operation during season is essential. Balanset-1A is used for balancing combine threshing drums, shredders, mulchers, mowers, and augers. The possibility to balance on-site without equipment disassembly allows avoiding costly downtime during critical harvest periods.
Specialized Equipment
The device is effectively used for balancing crushers of various types, turbochargers, drone propellers, and other high-speed equipment. The rotation frequency range from 250 to 90,000 RPM covers virtually all types of industrial equipment.
Advantages Over Similar Products
Economic Value
At a price of €1,751, Balanset-1A delivers the functionality of devices costing €10,000-25,000. The investment breaks even after preventing just 2-3 bearing failures. Savings on outsourced balancing specialist services reaches thousands of euros annually.
Ease of Use
Unlike complex vibration analyzers requiring months of training, mastering Balanset-1A takes 3-4 hours. The step-by-step guide in the software allows professional balancing by personnel without specific vibration diagnostics training.
Mobility and Independence
The complete kit weighs only 4 kg, with power supplied through the laptop’s USB port. This allows balancing in remote conditions, at remote sites, and in hard-to-reach locations without additional power supply.
Versatile Application
One device is adequate for balancing the widest spectrum of equipment – from small electric motors to large industrial fans and turbines. Support for single and two-plane balancing covers all typical tasks.
Real Application Results
Drone Propeller Balancing
A user achieved vibration reduction from 0.74 mm/s to 0.014 mm/s – a 50-fold improvement. This demonstrates the exceptional accuracy of the device even on small rotors.
Shopping Center Ventilation Systems
Engineers effectively balanced radial fans, achieving reduced energy consumption, eliminated excessive noise, and increased equipment lifespan. Energy savings recovered the device cost within several months.
Agricultural Equipment
Farmers note that Balanset-1A has become an indispensable tool preventing costly breakdowns during peak season. Decreased vibration of threshing drums led to lower fuel consumption and bearing wear.
Cost and Delivery Terms
Current Prices

Complete Balanset-1A Kit: €1,751
OEM Kit (without case, stand, and scales): €1,561
Special Offer: €50 discount for newsletter subscribers
Wholesale Discounts: up to 15% for orders of 4+ units

Acquisition Options

Official Website: vibromera.eu (recommended)
eBay: certified sellers with 100% rating
Industrial Distributors: through B2B channels

Payment and Shipping Terms

Payment Methods: PayPal, credit cards, bank transfer
Shipping: 10-20 business days by international mail
Shipping Cost: from $10 (economy) to $95 (express)
Warranty: manufacturer’s warranty
Technical Support: included in price

Final Assessment
Balanset-1A stands as an ideal solution for organizations striving to implement an efficient equipment balancing system without major capital expenditure. The device makes accessible access to professional balancing, enabling small enterprises and service centers to offer services at the level of large industrial companies.
The combination of reasonable price, ease of use, and professional features makes Balanset-1A an essential tool for modern technical maintenance. Investment in this device is an investment in equipment reliability, decreased operating costs, and improved competitiveness of your company.

Thanks for sharing, this is a fantastic article.Really looking forward to read more. Keep writing.

Enjoyed every bit of your article.Thanks Again. Really Cool.

Thanks a lot for the blog article.Much thanks again. Will read on…

Really enjoyed this article.Thanks Again. Keep writing.

Really informative blog article.Really looking forward to read more. Want more.

Thanks a lot for the blog.Really looking forward to read more. Will read on…

A big thank you for your article post.Much thanks again. Fantastic.

Appreciate you sharing, great article.Thanks Again. Will read on…

Muchos Gracias for your post.Much thanks again. Really Great.

I loved your article post.Really looking forward to read more. Great.

Really appreciate you sharing this post.Really looking forward to read more. Cool.

Thanks again for the blog article.Much thanks again. Cool.

I think this is a real great blog.Really thank you! Fantastic.

A round of applause for your blog.Really looking forward to read more. Awesome.

I cannot thank you enough for the blog.Really thank you! Will read on…

Im grateful for the post.

I cannot thank you enough for the blog post.Really looking forward to read more. Will read on…

Major thankies for the blog post.Thanks Again. Keep writing.

I loved your article. Really Cool.

Wow, great article.Really looking forward to read more. Cool.

Thanks a lot for the blog post.Thanks Again. Really Cool.

Thanks so much for the post.Really thank you! Want more.

Im grateful for the article post.Much thanks again. Great.